ioLogik 2542-HSPA features
Front-end intelligence with Click&Go Plus control logic, up to 48x rules
Active communication with MX-AOPC UA Server
Automatically complement disconnection period data with MX-AOPC UA Logger software
4-port unmanaged switch built in for linking to Ethernet devices
I/O expansion port for daisy chaining up to 8x ioLogik E1200 units
3-in-1 RS-232/422/485 serial port for connecting to serial devices in the field
Simplify I/O management with MXIO library for Windows or Linux platforms
9V to 48V DC
-30°C to +70°C operating temperature (on -T version)
ioLogik 2542-HSPA overview
The ioLogik 2500 is a smart remote I/O product with unique hardware and software designs, making it an ideal solution for a variety of industrial data acquisition applications. The ioLogik 2500’s hardware design includes a 4-port unmanaged Ethernet switch and 2x serial ports, enabling the ioLogik 2500 to seamlessly connect to a variety of field devices.
One of the Ethernet ports can be used to link to 8x daisy-chained ioLogik E1200 expansion modules to provide more than 100 channels. The ioLogik 2500 acts as the “head” unit, with Click&Go Plus logic used to control the entire I/O array. Most importantly, the ioLogik 2500’s single IP is all that’s required to connect the entire I/O array to your network, providing the perfect solution for industrial field sites that have an insufficient number of IP addresses.
The new Click&Go Plus control logic now supports up to 48x rules with further upgrades to 8x onditions/actions. In addition, its graphical user interface provides 3x logic gates and 3x multi-layers, helping you build more powerful and efficient IO solutions. Once you finish setting up your Click&Go Plus logic rules, IOxpress’s easy-to-use simulation function can be used to find potential errors in your Click&Go Plus rules before uploading them to your online devices. Peer-to-peer (P2P) mode is widely used for industrial applications.
Traditionally, you would need to use P2P devices on both sides of the connection. However, if a configuration mismatch occurred between the P2P devices, the P2P connection would fail, after which you would need to spend extra time and effort to check the P2P settings. With IOxpress, all you need to do is set up the output device, and the P2P connection will be established automatically.
The ioLogik 2500’s unique IO expansion hardware design lets you link up to 8x ioLogik E1200 modules into a versatile I/O array with 100+ different I/O channels. The ioLogik 2500 acts as the perfect “head” unit, using Click&Go Plus logic to control the entire I/O array, and providing a single IP to connect the entire I/O array to your network.
IOxpress integrates a user-friendly interface with offline/online configuration, allowing you to configure every I/O parameter offline, and then upload the settings to your online devices, greatly reducing the time and cost needed to manage and configure your IO solutions.
The ioLogik 2500 supports micro SD cards with up to 32GB of memory, turning the ioLogik into a powerful datalogger for storing valuable data. And with a built-in FTP server, important data from field sites can be accessed remotely by different systems. In addition, the 2x serial communication ports can be used to input data from devices using the Modbus RTU protocol, and then transform the data into Modbus TCP or AOPC tag format before sending it out over the Ethernet network.
The new MX-AOPC UA supports both UA server and DA server types. MX-AOPC UA server has a number of strengths. UA server provides a standard, state of the art security model, assuring your system’s security, and supports communication channels via the standard UA TCP port. This means that messages can be relayed through third party proxies. In addition, configuring the firewall is be easier, since you won’t need to worry about DCOM settings.
In addition, MX-AOPC supports both the traditional Modbus protocol and Moxa’s patented Push type communication. Unlike the traditional passive “pull” method, “active” messages are automatically “pushed” from the ioLogik 2500 to the SCADA system when the I/O state changes or pre-configured events occur.
For more information about the ioLogik 2542-GPRS please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
ioLogik 2542-HSPA downloads
An introduction to the
Impulse system integration facility
Why choose Impulse?
- Over 20 years experience in the automation, embedded and industrial computing industry
- Extensive industrial computing product range from our carefully selected set of leading manufacturing partners
- We offer lifetime in house technical support
- We have a purpose built modern integration facility for off-the-shelf and bespoke system production
- We can assist you with the design, development and deployment of your project
- We offer comprehensive support on revision control and longevity of supply of our complete product range
- Our in house MCTS can create custom Windows Embedded images to your exact requirements
- Dedicated and knowledgable account managers to support you with your project
We are an official Moxa UK partner - enquire now for our best pricing support and technical advice